re and maintenance of the transparent membrane packing machine
Care and maintenance of the transparent membrane packing machine
A vacuum packaging machine is not allowed in the handling process tilted and impact, but not down to the ground handling, vacuum packaging machine during installation must have a reliable grounding device.
2, is strictly prohibited hand into the heating rods to prevent injuries in emergency situations immediately cut off the power after power work when the first ventilation expire shutdown after power failure.
3, the impurity filter should often washable (typically 1-2 months to clean, cleaning time should be shortened, such as packaging debris-like objects).
4 2-3 months of continuous work should open the rear cover 30 lubricating the sliding parts and switch touch, should be considered on the heating rods connecting activities at the use of lubrication, decompression, filter, oil mist joint pieces 24 to be regular checks to ensure that oil mist, oil
Cup oil (sewing machine oil), water filter cups.
, Heated silicone to keep clean, not sticky foreign body, so as not to affect the quality of sealing, heating rods, sticky paste from the heating plate under the second floor of the insulation, the timely replacement of damaged should be to avoid short circuit. Users bring their own work gas source and charge
Gas source, the working pressure of the vacuum packaging machine is set to 0.3MPa, more appropriate, no special circumstances do not adjust too much.
The cigarette packaging machine at a temperature of -10 ℃ -50 ℃, relative humidity less than 85%, non-corrosive gases in the ambient air, no dust, non-explosive environment. Like packer and shrink machine, vacuum packaging machine for three-phase 380V power
Source
7 ensure that the vacuum pump for the vacuum packaging machine, vacuum pump motor does not allow the reverse. Camellia oleifera the Yesan Wei transparent film packaging seats should be inspected regularly, normal oil 1/2-3/4 of the oil window (not over), when the vacuum pump in water or oil colors
Black when it should be replaced with new oil (usually for work once a month or two to replace a vacuum # gasoline, 30 # gasoline, oil can).
